OPPO Mobile Phone Power Saving Settings: Turn Off 5 Power-consuming Switches To Greatly Increase Battery Life

Many friends holding OPPO phones always feel that the battery is draining very quickly.

Even though I didn’t play much, it was fully charged in the morning and only half charged by noon.

After browsing a few short videos and chatting on WeChat for a while, I had to find a charger in less than half a day.

You must bring a power bank with you when you go out, so you can feel at ease.

Especially for old mobile phones that have been used for about two years, the power loss speed is even more ridiculous.

Many people's first reaction is that the battery is broken and they rush to spend money to replace the battery.

It's really not necessary.

In most cases, when a mobile phone consumes power very quickly, it is not caused by hardware problems, but by software running in the background secretly consuming power, and some functions that do not need to be always turned on are left on for a long time.

There is no need to spend a penny or disassemble the phone. We can turn off a few power-consuming switches by ourselves, and the battery life of the phone can be significantly improved in just a few minutes.

1. Uncover the “power thief” in OPPO mobile phones

The reasons why OPPO mobile phones consume so much power are mainly concentrated in three aspects.

The first one is Background program resident .

Many people directly press the Home button to return to the desktop after using the software without actually closing it.

In the background, these software secretly refresh data, connect to the Internet, and even perform positioning. Even if you lock the screen, they will not stop.

The second one is Function switch is not turned off all year round .

For example, Bluetooth, NFC, location services, and 5G networks are all searching for signals and transmitting data all the time, so power consumption naturally remains high.

The third one is Screen settings consume too much power .

The brightness of the display is adjusted to the maximum, the refresh rate is always maintained at the highest level, and dynamic effects are all turned on. All of the above situations will increase the burden on the processor.

Once you find the root cause, the solution is simple.

2. Turn off background auto-start to prevent software from escaping.

This is the most critical Power saving settings one.

Once many software are installed, they are granted permissions to start automatically at boot and perform background activities by default. These software will run silently in the background, thus consuming power.

We need to control them manually.

Turn on the phone, find "Settings", search for the "Applications" option, tap to enter the option, and select "Application Management".

On the application list page, click the two dots icon in the upper right corner and select "Startup Management".

All software on your phone will be listed here.

You can turn off the so-called "automatic management" switch and then make individual settings for each software.

I would like to give you a suggestion, just leave software such as WeChat and QQ that must receive messages in real time, and make them in the state of "allow self-start, allow associated startup, and allow background activities", no less punctuation!

Other software such as games, videos, shopping, and news, Turn off all three permissions .

After this setting, these software will not secretly consume power without your knowledge.

3. Turn off Bluetooth, NFC and 5G networks at will

These functions are very useful, but if they are left on regardless of the occasion, they will consume a lot of power.

Pull down the control center of the OPPO phone and you can see a row of shortcut switches.

After turning on Bluetooth and NFC (that is, the "N"-shaped logo), when you are not using headphones, transferring files, or swiping your bus card, you can simply click to turn them off.

It's no trouble at all to open it when you need to use it.

Say it again 5G network , its network speed is indeed fast, but its power consumption is also much higher than 4G.

Especially when you are in an area with poor 5G signal: the mobile phone will search for the signal one after another, and the battery will drop at an alarming rate.

In daily life, if you do not have particularly high requirements for network speed, such as just browsing WeChat and browsing web pages, you can change the "Preferred Network Type" to 4G in "Settings – Mobile Network".

Switching to 4G during standby can save a lot of power.

4. Adjust screen refresh rate and brightness

The screen is a major power consumer of mobile phones. Once this is set up, the power saving effect will be immediate.

Many OPPO mobile phones have features that support high refresh rates, such as 90Hz or 120Hz.

Swiping the screen with it is indeed silky smooth, but the battery consumption is also faster.

Go to "Settings", find the "Display and Brightness" option, then enter the "Screen Refresh Rate" setting item, and change it from the "High Refresh Rate" state to a mode known as "Smart Switching".

Today's mobile phone systems will select a suitable refresh rate based on the operation you are performing at the moment. In this way, it not only ensures smoothness, but also achieves the effect of saving power.

In addition, pull down on the Control Center to adjust the screen brightness bar to a level that you find comfortable and non-dazzling, without having to pull it all the way to the brightest setting.

There is also a hidden function, in "Settings – Display and Brightness", look for "Reduce screen refresh rate" or similar options, which can reduce it automatically in situations where high refresh rate is not required (such as reading), and can also achieve a very good power saving effect.

5. Turn off user experience plans and useless notifications

In the OPPO mobile phone system, an option called "Join the User Experience Program" is enabled by default.

This feature will collect anonymous information such as your phone’s usage habits and operating data, and send it to the manufacturer for system improvement.

Although it is performed silently in the background, it does consume some power and network traffic.

This function is of little use to us ordinary users, so we can safely turn it off.

The route is: Go to the area where "Settings – Privacy – System Avatar and Security" belongs, or search for "User Experience Plan" directly in the settings, and then turn off the switch after finding it.

In addition, software notifications frequently wake up the screen and processor.

You can enter "Settings – Notifications and Status Bar" to turn off notification permissions except for WeChat, SMS, Alipay and other necessary software.

Reducing the number of times the screen is lit can also easily extend battery life.

There is no need to rush to replace the battery due to the problem of mobile phones draining power quickly.

Follow the above steps, turn off background auto-start, turn off Bluetooth and 5G, set the screen refresh rate to smart switching mode, and turn off the user experience plan. In this way, your OPPO phone's battery life will immediately feel the change.

These settings are completely one-time implementation and can be completed in just a few minutes. It is a zero-cost and zero-risk task, and even elders can follow and understand it.

Completely say goodbye to the anxiety and worry about battery life. You no longer need to carry a heavy power bank when you go out, allowing your old mobile phone to return to a state of long-lasting battery life.