New Ideas For Kitchen Storage Design, Fill In These Blanks And Let The Kitchen Get Rid Of Clutter

The kitchen is used every day, but there is always the irritation of "the more work is done, the more messy it becomes and the more it becomes full."

The good news is that instead of spending money, you can use your brain and move your seat, half of the countertop can be cleared, cooking will be faster, and your mood will be stabilized.

The key is just four words: get ashore at a dead end.

Revitalize the gaps in the refrigerator, revitalize the edges of the flue, revitalize the underside of the wall, revitalize the backs of cabinet doors, and revitalize the corners of windowsills. After these neglected gaps are revitalized, the kitchen seems to have changed its operating system.

After a round of attempts, I realized that storage is not about stuffing things full of things, but about keeping frequently used items in a place that is “within reach” and hiding items that are rarely used.

Replace horizontal stacking with vertical stacking, replace scattered storage with modules. If it can be hung, then it does not occupy the countertop. If it can be pulled out, then the number of rummagings will be reduced.

On the ground, there are eight tricks that are effective enough and keep up with the smarter methods now.

Narrow slit next to the refrigerator, squeeze out the last 1 centimeter

In the past, the old method was to make a self-made small shelf with tight fittings to hold some room-temperature fruits and vegetables, which was economical and durable.

At present, the more trouble-free method is the magnetically-type traceless side hanging rack, which can be directly attached to the side of the refrigerator. Seasonings, kitchen paper and fresh-keeping bags can be placed and hung in layers, and can be returned at will after use, and so on.

If the gap is even narrower, then insert a narrow multi-layered cart. This cart can smoothly run into the gap in a space of 10 to 20 centimeters. Its load-bearing capacity is not unreal. The process of pulling it in and out is very smooth. Even if you rent a house, you don’t have to worry about being unable to move it.

If you pay attention to the overall effect, you can also align the vertical line of the refrigerator door with the wall cabinet next to it. The door gap will no longer protrude in the east and west. In this way, the line of sight will be much more comfortable.

Be sure to measure the size accurately. This is a very important point. After purchasing the stroller, do not rush to remove the label. You should first put it inside and try it. It is most practical to leave a few millimeters of movable space on the left and right sides.

The flue is thin and the cabinet is clean. Clean the dead corners.

Don't just pack the flue in a box.

Make high-thin cabinets to "fully utilize" them, so that spices can be neatly arranged and easily accessible during cooking.

The more advanced version puts more emphasis on this: to achieve the effect of standing tall, one door runs through to the bottom, and the interior is realized through movable laminates and pull-down hardware. Whether it is a taller or shorter bottle, the divisions can be adjusted.

If there is sufficient space, it can be made into a thin side-pull narrow cabinet with a width of 300 mm. By gently pulling it, you can see that the capacity of a single layer is increased by 30% compared to ordinary thin cabinets.

The cabinets are lined with moisture-proof and mildew-proof linings, so you won’t be afraid of mold growing in areas with heavy heat and oily fumes.

If there is a need for electric steaming and baking, then built-in appliances and thin cabinets can be combined to make them on the same facade, stacking functions in one place, and freeing up the countertop.

Choose corrosion-resistant hardware so that it can still be pulled out smoothly over time.

The slope of the wall cabinet prevents dust from collecting at high places

If the wall cabinet is just a row of square boxes, it is equivalent to wasting half of the wall.

A bevel is added to the bottom, the storage capacity is doubled, and the head is less likely to be hit. The appearance is also equipped with a horizontal sliding door, so that the appearance can be firmly maintained.

A relatively smarter approach is to integrate the idea of ​​​​inclined surfaces with hardware components that are pulled downward to achieve lifting. Whether it is driven by electricity or manual operation, items in a higher position can fall through the pulling operation. In this way, people do not need to use a raised stool or look up to find it.

Installed in the corner Rotating storage rack , the corners that were originally out of reach can also be turned out.

The small part of the wall under the wall cabinet can be made into a splash guard and a wall-mounted track system. One track is responsible for holding magnetic hooks, small trays, knife holders and spice boxes. Its position can be slightly adjusted according to cooking habits. It is a very modular design, so that everything can find a suitable place on it.

In terms of color tones, there are cream white and soft natural green, paired with handleless door panels, which are particularly suitable for creating a refreshing and breathable feeling in a small space.

Counterattack under the sink, pipes are not an obstacle

There are also many articles under the table.

The clutter under the sink is often caused by pipes going around and around.

The telescopic rod is built into the base cabinet and is equipped with small pieces for hanging baskets. The sponge has a "parking space", the brush has a "parking space", and the dishwashing block also has a "parking space".

The currently existing telescopic pole has a silicone head with anti-slip function and has enhanced load-bearing characteristics. If two full bottles of detergent are placed, it can be in a stable state.

On the inside of the cabinet door, install a metal storage basket that does not require drilling. This storage basket should preferably have slide rails. You can pull out the plastic wrap and garbage bags and store them out of sight.

Make a rotating hanger on the back of the cabinet door. When you open the door, you can immediately access the items, and when you close the door, they will be hidden immediately. This is especially suitable for rags and various small brushes, which are items that require special ventilation functions.

When measuring, remember to avoid the elbow of the sewer pipe. Don't be greedy for too much. It is more practical to leave an access opening than to fill it up.

Wall hanging rod, small tools can be placed on the wall and breathable

There is no need to pile all the gadgets on the wall on the countertop.

There is a board hanging under the wall cabinet and a hanging rod installed next to it. The S hook is used to hang scissors and spatulas. Commonly used seasonings are placed on the board, which can be grabbed by raising your hand. Various supplies are placed here for easy use.

To improve it, replace the ordinary S hook with a magnetic hook. The position adjustment is more convenient, it will be cleaner when cleaning, and it will become shiny by wiping away oil stains.

At this stage, the wall track system is quite mature. One track can accommodate three or four kinds of accessories, including spatulas, colanders and pot lid holders. These can be hung on it, thus making the countertop fresh and tidy by half.

Be sure to pay attention to the load-bearing. The screws should be driven into the gaps of the tiles or on the solid wall. Do not use nail-free glue to hang heavy objects just for the sake of convenience and trouble.

Put the pots upright and bid farewell to the clinking sound

The pots and pans are the highlight.

Change the tile layout to vertical layout and the efficiency will be doubled.

The adjustable partition board is placed under the sink or in the base cabinet. The pot body is in an upright state, and the pot lid has independent compartments. It is very clear who is what and can be understood at a glance.

The material is made of stainless steel, which is stable in load-bearing, moisture-resistant and does not rust.

To be more detailed, create a drawer specially used for placing pot lids, or use the baseboard area under the feet to turn it into a shallow drawer, with a thin layer just enough to place the pot lids, so that when the door is opened, it will no longer make a clanking sound.

The height of the dividing plate needs to be adjusted according to the length of the pot handle, and the wok and the soup pot should be separated so that they do not conflict with each other when taken.

High cabinets for small appliances and completely cleared countertops

The more small appliances you buy, the more you buy them. Instead of piling them up on the countertop, it’s better to put them into one High cabinet .

The floor-to-ceiling electrical cabinet houses an air fryer, a coffee machine of the same style, and a food processor. Its shelves are modular and adjustable, and there are USB or multi-hole sockets inside so that wires don't fly around.

Sufficient space should be reserved for heat dissipation, usually about 10 cm of the rear or top cavity, so that the machine will run safer.

I want to be completely "invisible" and create a door with the same color. When closed, it will be like a whole wall, without any other unnecessary residue, very clean.

When reserving the socket position, you need to consider the corresponding height of the machine and not let the plug be blocked by the shelf, so that it will be smooth to use.

These modifications do not require full configuration at one time.

First clear the countertop and define three high-frequency areas: cutting, cooking, and cleaning.

Commonly used items are placed close to the high-frequency area. The closer they are, the easier they are to use.

File those that are not commonly used high, deep, or in the back row.

Carefully measure the size of each dead corner. For narrow gaps, choose a method suitable for placing carts or narrow drawers. For walls, use rails. Facing cabinet doors, use storage baskets. For base cabinets, use dividers and telescopic rods.

The colors should be as uniform as possible, the lines should be kept clean, and a blank area should be left on the countertop for operations, so that the space will naturally appear spacious.

Where electricity is needed, reserve sockets and wiring in advance to save trouble later.

Wherever it is necessary to clean, try to make objects smokeable and accessible, so as not to worry about oil fumes accumulating year after year.

After all, kitchen storage has changed from "hiding things" to "the route of movement is efficient, looks comfortable, and will not be tiring to use."

Revitalize the side seams of the refrigerator, revitalize the flue, revitalize the walls, revitalize the cabinet doors, revitalize the window sills, and revitalize the base cabinets. These small corners rely on ideas, not budgets.

For example, a small investment such as a few magnetic pieces, a narrow cart, and a few sets of adjustable hardware can often show more effort than a major overhaul.

When cooking, you can lift your hand to take it and turn around to store it. At that time, the smoke will not be bundled with the mess. This is a neat look that can be maintained for a long time.