Cleaning Methods For Bathroom And Kitchen Tiles To Make Your Ideal Decoration Material Look Like New Again
From the perspective of a housekeeper: deep cleaning of floor tiles, saying goodbye to dirt and giving them a new look
As a senior housekeeper with more than ten years of experience, I have cleaned a large number of tile floors. Many people think that ceramic tiles are "easy to care for" and can be mopped at will. However, in fact, unreasonable cleaning methods are not only ineffective, but may also damage the surface of the ceramic tiles. Today, I will lead you from a professional perspective to carry out a special deep cleaning of floor tiles, so that your floor can truly achieve "zero stain residue".
Scenario 1: "Anti-aging" cleaning technique for exterior wall tiles
Exterior wall tiles have been exposed to the open air for a long time, and the wind and wiper conditions they endure are much more severe than those indoors, and the types of dirt are more complex.
Tool selection: high pressure washer, stiff brush, spatula, spray bottle, protective gloves.
Operation process and details:
1. Preliminary dust removal: First use a high-pressure water gun to clean the floating dust on the wall.
2. Prescribe the right medicine:
The most common stubborn stains on exterior walls are cement stains/mortar. Do not shovel forward with brute force, as it is easy to scratch the glaze. You can spray a special concrete cleaner first, wait for 3-5 minutes to soften, then gently remove it with a spatula, and finally scrub it clean with a brush.
Efflorescence appears whitening (i.e. white bloom): This phenomenon is caused by the precipitation of alkaline substances in the cement with water. The effect of ordinary pickling is limited and it is easy to relapse; professional neutralization treatment must be carried out with a professional alkalin remover. After the treatment is completed, it is recommended to apply a layer of waterproofing agent to block the water from the source to prevent the recurrence of efflorescence.
This type of special stains, that is, paint or rust spots, requires the use of targeted and powerful special cleaners. Do not use strong acids or alkalis, otherwise it will destroy the gloss of the brick surface and cause adverse effects.
**Guidelines for avoiding pits are as follows**: When working at heights, special attention must be paid to safety matters. Before using a cleaning agent, you must select a place that is not easily noticed and conduct a small-scale test. Only after it is determined that there is no corrosion or fading reaction can it be used on a larger area.
Scenario 2: Secrets to “beautifying” the bathroom space
If the bathroom is damp and poorly ventilated, the tiles can easily become dull and even breed mold.
Tool selection: soft brush, sponge, watering bottle, old toothbrush, dry rag.
Operation process and details:
The formula has been upgraded. The effect of pure soapy water is more normal. My trick is to add a small amount of soapy water to a bucket of warm water, then add a little ammonia, and drop a few drops of turpentine. This formula can effectively break down soap scum and water stains, and form a protective film on the surface of the tiles, thereby restoring them to the same luster as when they left the factory.
Regarding the detailed treatment of mold spots in the gaps between ceramic tiles, first apply decontamination paste to the gaps, then use an old toothbrush to scrub, rinse thoroughly, and then use a brush to apply a layer of waterproofing agent on the gaps. This is a key step to prevent repeated growth of mold!
Comparing the effects, before the treatment, the bathroom tiles were gray and had a dull, blocking feel to the touch. After the treatment, the tile surface became smooth and translucent, smooth to the touch, and the entire space appeared bright and spacious.
Scene 3: The end plan of the kitchen war "oil"
The kitchen has thick grease and is sticky and difficult to clean, making it the hardest hit area for household cleaning.
Tool selection: nano sponge, oil stain cleaner, spray bottle, baking soda, white vinegar.
Operation process and details:
When dealing with daily oil stains, you should evenly spray a kitchen cleaner specifically for oil stains on the area with oil stains, then let it sit quietly for a few minutes to decompose, and then wipe it with a wet cloth. If you encounter an old, heavy oil stain that is particularly serious, you can first soak the towel in hot water, and then apply it on the oil stain to soften it.
The second point is to upgrade the formula and add a little white vinegar and paraffin to the cleaner. White vinegar can assist in achieving the oil removal effect. Paraffin can leave an extremely thin protective film after cleaning, making it difficult for oil stains to adhere again, so that the next cleaning will be much easier.
3. Stubborn local conditions: For small-scale heavy oil stains in front of the stove, squeeze out toothpaste and wipe it repeatedly with a wet cloth. The effect will be visible immediately.
<strong>Guide to avoid pitfalls: Steel wool is the "number one killer" of ceramic tiles! It leaves irreparable scratches, making it easier for dirt to hide. Please always use a soft rag or nano sponge.
Scenario 4: Precise removal of daily dirt
Accidents are inevitable in life. Tea will drip, juice will drip, and there will be offset residue. Different strategies must be used to deal with these.
Tools and materials include banana water, potassium bicarbonate solution, sodium cyanide solution, which should be used with caution, decontamination paste, and floor wax.
Operation process and details:
1. Liquid stains: Pigment stains such as tea, coffee, drinks, etc. should be absorbed immediately with a rag. The marks left behind can be wiped with potassium bicarbonate solution to neutralize them.
2. Adhesive residue: For the stubborn glue mark left after the paper is torn off, you only need to find a cloth with a wiping function, dip it in a small amount of banana water (that is, a colorless, transparent, volatile liquid used to dissolve other substances), wipe it with slight force, and the glue mark will be dissolved in an instant. Please note that during use, ensure that the environment has good air circulation conditions.
3. Maintain the sealing layer: No matter what kind of ceramic tile it is, regular maintenance is the key to extending its life and maintaining its beauty. It is recommended to wax the tiles every two to three months. Waxing can not only fill those tiny scratches, but also form a protective layer, making daily cleaning more efficient. Just a gentle mop will make it as clean as new.
4. Anti-mildew in gaps: As mentioned before, regularly use decontamination paste to clean brick joints, and then seize the time to reapply waterproofing agent . This is the key to preventing blackening of gaps.
By understanding these specialized techniques for differentiating scenes and stains, and using the correct tools and maintenance procedures, your floor tiles can not only get rid of dirt, but also stay brand new for a long time, becoming a dazzling sight in your home. Remember, cleaning is not about brute force, but a blend of science and technology.
